Product

Tensile Test Beds

Product Name : Push-on-Pull Type (Capacity 500MT~1000MT)

▼ Push-on-Pull design is allowed for proper ASTM E-4 calibration even over 450 MT (1 million pounds), enhanced load cell protection, and quicker ram return speeds.  The load cell is used in compression type and is placed between the transfer head and the cylinder.  Tie-rods then connect the transfer head to the cross head.  This design is easier to put the master compression load cell for calibration.

Product Specification
Model WPT-500 WPT-600 WPT-800
  Capacity – metric tons 500 600 800
  Units of measurement Metric (mm) Metric (mm) Metric (mm)
  Useful testing length A 12000 12000 12000
  Overall length (approx.) B 19410 19410 19910
  Overall width (w/o prot. cover) C 1958 1958 2100
  Channel width D 1138 1138 1236
  Max. testing width E 1531 1531 1623
  Overall height (w/ prot. cover closed) F 1156 1156 1319
  Overall height (without prot. cover) G 828 828 898
  Overall height (prot. cover open fully) H 2338 2338 2678
  Standard stroke I 1250 1250 1250
  Extra standard length section 9000 9000 9000
** WIROP® reserves the right to change specifications.